ENGLISH INSTRUCTIONS FOR USE4 146 3082 000(2)2007-06 Edge 28BSAFETYThe following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessaryprecautions to safeguard people and property.The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the totalcooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, whileworking or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudentoperator is the best guarantee against accidents and is essential for successful completion of any prevention program.SYMBOLSDANGER!It indicates a dangerous situation with risk of death for the operator.WARNING!It indicates a potential risk of injury for people.CAUTION!It indicates a caution or a remark related to important or useful functions.Pay particular attention to the paragraphs marked by this symbol.NOTEIt indicates a caution or a remark related to important or useful functions.CONSULTATIONIt indicates the necessity to refer to the Instructions for use Manual before performing any procedure.GENERAL INSTRUCTIONSSpecific warnings and cautions to inform about potential damages to people and machine are shown below.DANGER!Before performing any maintenance/repair procedure, turn the main switch to "0" and, if necessary,disconnect the battery.This machine must be used by properly trained and authorised personnel only. Children or disabledpeople cannot use this machine.Keep the battery away from sparks, flames and incandescent material.Do not wear jewelry when working near electrical components.Do not work under the lifted machine without supporting it with safety stands.Do not operate the machine near toxic, dangerous, fl ammable and/or explosive powders, liquids orvapors.––––––