KERN 466 Series Operating Instructions Manual

Contents

KERN 466 Series Operating Instructions Manual Manual pdf 4 page image

466-BA-defsi-0016123.3 Plus/Minus WeighingsFor instance to control piece-weights.Switch the balance on by pressing the ON/M key, then wait until “0” is indicated.Place rated weight on the weighing plate and tare on “0” by TARE key. Remove therated weight.Place the objects on the weighing pan successively, the balance will show anydeviation from the rated weight in “+” and “-“.According to the same procedure packages with the same weight, related to a ratedweight, can be produced.Return to the weighing mode by pressing the TARE key.3.4 Piece countingBriefly press the CAL/MODE key.The reference number 5 will appear.To call up the reference numbers 10, 25 and 50 press the CAL/MODE key severaltimes.Put as many pieces on the weighing pan as the set reference number requires.Confirm by pressing the TARE key..The balance is now in the piece counting mode and will count all pieces laying on theweighing pan.By pressing the CAL/MODE key the balance returns to the weighing mode anddisplays the weight of the counted pieces.Important: The higher the reference number, the more accurate the piececounting is.See the table “Technical Information” for minimum counting weight. If the number ofpieces is below the minimum weight the display shows “Er1”. Return to the weighingmode by pressing the CAL/MODE key.Tare cups can also be used to count pieces. Tare the tare cup by pressing the TAREkey before beginning the piece counting.

/ 7

Related manuals for KERN 466 Series