KERN 770-12 Operating Instructions Manual

KERN 770-12 Operating Instructions Manual Manual pdf 23 page image

90 770/GS/GJ-BA-defsi-00233 Balance Operating MenuIn the operating menu, you can define how your balance will adapt to ambientconditions and also how it will work to meet your special requirements. For yourconvenience, the menu codes have been factory-set so that you do not have to makeany changes, as a rule. If you have special operating conditions, adjust the balance toyour requirements by setting the menu codes of your choice.The factory-set menu codes are identified by an “*“ in this instruction manual. You canselect the functions not identified by an “*“ by setting the respective menu codes. Youwill find these codes in the section entitled “Balance Operating Parameters“. If you needto change any of the factory settings, we recommend that you enter these changesalong with the date in the column headed by “Changes“.3.1 Changing Menu Code SettingsTo select specific functions, you will need to setthe respective menu codes.There are three steps to change a code:- Accessing the menu- Setting a code- Confirming and storing the codeFor setting menu codes three keys have specialfunctions:CAL = Increases a number by one witheach press (the numbers change incycles)TARE = Confirms and stores a code setting,exits the menuPRINT = Moves to the next of the threenumbers of a code (1st-2nd-3rd-1st,etc.)Now please try changing a code to adapt yourbalance to a special power-on mode.The corresponding code for “automatic power-on“ is 8 5 4.