KERN CFS Operating Manual
Also see for CCS: Operating instructions
                                              | |
Contents
| 
11 Weighing to a certain target weight /target quantity and toler-ance controlThe balance allows weighing of goods to a certain target weight (net weight) or tar-get piece number within defined tolerances. With this function one can also check ifthe weighing good is within a defined tolerance range. Tolerance control is possiblein weighing or target mode.Reaching the target value is indicated by an acoustic (if activated in menu) and anoptic signal (tolerance mark T).11.1 Tolerance control in weighing modeOperation DisplayÖ Press , the active tolerance weighing mode isindicated.Ö If necessary, with "Tolerance control weighingmode" select [ ]ØÖ Press , the currently set upper limit value is dis-played.Ö Using numeric keyboard enter desired value ordelete using .ØÖ Press , the currently set lower limit value is dis-played.Ö Using numeric keyboard enter desired value ordelete using .Ö Press , tolerance control is started. The T symbol over appears.Ö Place the weighing goods and with help of the tolerance mark T check if the netweight of the weighed goods is under, within or over the specified tolerance.Display of tolerance mark T, if weighing goods under the specified tolerance:CFS/CCS-BA-e-1013 29 |
Related manuals for KERN CCS
manualsdatabase
Your AI-powered manual search engine