KERN ILT 12K0.1DM Operating Instructions Manual

Also see for ILT 120K1DM: Operating instructions

ILT-BA-e-0612 479.1.2 CountingBefore the balance can count parts, it must know the average part weight (i.e.reference). This is either entered manually or determined by weighing. Proceed byputting on a certain number of the parts to be counted. The balance determines thetotal weight and divides it by the number of parts (the so-called reference quantity).Counting is then carried out on the basis of the calculated average piece weight.As a rule:The higher the reference quantity the higher the counting exactness.Display overview for parts counting operation:1. Number of all parts on the weighing plate2. Weighing assistance coarse/fine (only displayed for active dispensing)3. Operating mode (status bar)4. Reference weight5. Weight of all parts on the weighing plate6. Tolerance marker (only displayed for active tolerance weighing)too lightnominalvaluetoo heavy7. Display for parts counting operationOperation DisplayÖ Call up menu item "M1 Counting" (see chap. 9.1)Ö Press -buttonÖ Use the cursor ( ► ) to select your setting (01 - 07)Parts counting setupM1 01 Unit weight02 Recall sample03 Store sample04 Checkweighting05 Filling0607 RunStatistics5.0000 gONONOFF01 Reference weight – manual entering of the reference weightÖ Press the -key; the current menu item blinks.Use the arrow keys to enter the reference weight for aunit. Confirm with -key.