KERN ITS 600K200M Operating Instructions Manual

Contents

operating instructions

Chapter 3: The menu22Configures the scale interfaces: can only be accessed by supervisor!Standard interface COM1 (RS232C).Optional interface COM2 (RS232C).Settings:Operating mode of interface > Chapter 3.7.1Communication parameters > Chapter 3.7.2Settings for printed reports > Chapter 3.7.3Insert line feeds into printed reports > Chapter 3.7.4Reset interface settings to factory settings > Chapter 3.7.5Manual data output on printer ( key). Factory setting.Automatic output of stable results on printer (for series weighings).Continuous output of all weight values via the interace.Bidirectional communication using MT-SICS commands (to control scale from a PC).Same as Continuous (see above), but with 2 fixed blanks before the unit (compatiblewith KERN TB/TS/TT).Same as Dialog (see above), but scale sends 2 fixed blanks before theunit (compatible with KERN TB/TS/TT).DigiTOL-compatible format. Weights for transfer can be selected: tare, net, gross(gross weight is marked with B).Same as dtb mode (see above) but gross weight is marked with G.Continuous Weight mode.Connects a second display.COMMUN1ttCOM 1COM 2t3.7 Configure interfaces (COMMUNICATION )Display ExplanationtA. PrintCONt1NUd1ALOG2nd. d1SPPrintttttttttttttCONt.OLdd1AL.OLddt - bdt - GCOnt - WtMOdE3.7.1 Operating mode of interface (COMMUNICATION > Mode)Display Explanation