                        | |
Contents
| 
12 KIB-TM-ZB-e-18123 Ethernet (optional)The Ethernet allows you to transmit data via cable to devices (such as computers,printers etc.) that are interconnected in a local network. No direct connection betweenKIB-TM and PC is necessary.Set the following menu items in KIB-TM (See chap. 8) Menu item "P9 Prt" "oPt" "intF" "EnEt" (Enable output Ethernet) Menu item "P9 Prt" "oPt" "ModE" " Count" (Output mode cont. dataoutput) Menu item "P9Prt" "oPt" "iP1-4" Set IP address KIB-TM as follows:Enter IP address not yet allocated in network:Example: 10.0.1.104It is always necessary to enter three numbers following scheme below:10. 0. 1 104 IP-address010 000 001 104 Entry sequence in KIB-TMIP1 IP2 IP3 IP4The same principle is used to configure the following settings: Menu item "P9 Prt" "oPt" "MASK_1-4" (Subnet mask) Menu item "P9 Prt" "oPt" "GATE_1-4" (Gateway)Now enter the IP address for the PC on the display unit(If unknown proceed as follows: Press Windows key and "R" simultaneously Enter "cmd" and press Enter to confirm The entry prompt will appear Enter "ipconfig" and press Enter to confirm The PC‘s IP address will appear on the screen) |
Related manuals for KERN KIB-TM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine