KERN KIP-V20 Installation Instructions Manual

KIP_V20-IA-e-1710 53.5 Monitoring of Test ResourcesIn the framework of quality assurance the measuring-related properties of theweighing system and, if applicable, the testing weight, must be checked regularly.The responsible user must define a suitable interval as well as type and scope of thistest. Information is available on KERN’s home page (www.kern-sohn.com with regardto the monitoring of weighing system test substances and the test weights requiredfor this. In KERN's accredited DKD calibration laboratory test weights and weighingsystems may be calibrated (return to the national standard) fast and at moderatecost.4 Basic Safety Precautions4.1 Pay attention to the instructions in the Operation ManualCarefully read this operation manual before setup and commissioning,even if you are already familiar with KERN balances.4.2 Personnel trainingThe appliance may only be operated and maintained by trained personnel.The installation of a display unit must only be carried out by a well acquaintedspecialist with the workings of weighing balances.5 Transport and storage5.1 Testing upon acceptanceWhen receiving the appliance, please check packaging immediately, and theappliance itself when unpacking for possible visible damage.5.2 Packaging / return transport Keep all parts of the original packaging for a possiblyrequired return. Only use original packaging for returning. Prior to dispatch disconnect all cables and removeloose/mobile parts. Reattach possibly supplied transport securing devices. Secure all parts against shifting and damage.