KERN KIP-V20 Installation Instructions Manual

KIP_V20-IA-e-1710 96.4 Connecting a display unitAttentionPut the connecting cable to the display unit in a manner that it is protected againstdamage.Description of the connection cable:terminal Color StateEXC+ [IN+] red voltage +SIG + [OUT+] green signal +SIG -[OUT-] white signal -EXC -[IN- ] black voltage -7 OperationInformation about• Network connection (power is supplied via the connecting cable of thedisplay unit)• Initial Commissioning• Connection of peripheral devices• Adjustment, linearization and verification (only the complete balance isverifiable, i.e. weighing bridge in conjunction with a suitable display unit)and the correct operation you will in the operating instructions included in the scopeof delivery of the display unit.So a continuous optimal performance is guaranteed:• Avoid falling load, shock loads and impacts from the side!• For weighing operation, all objects must be placedcentrically of the weighing bridge and may not hang overthe edges or the ramps.• Check adjustment at regular intervals.