KERN MBC-M Series Operating Instructions Manual

Also see for MBC 15K2DM: Operating instructions Operating instructions Operating instructions

MBC-M-BA-e-1615 198 Unpacking, Setup and Commissioning8.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use. You will work accurately and fast, if you select the rightlocation for your balance.On the installation site observe the following: Place scales on a stable, even surface Avoid extreme heat as well as temperature fluctuation caused by installing next toa radiator or in the direct sunlight; Protect the balance against direct draughts due to open windows and doors; Avoid jarring during weighing; Protect the balance against high humidity, vapours and dust; Do not expose the device to extreme dampness for longer periods of time. Non-permitted condensation (condensation of air humidity on the appliance) may occurif a cold appliance is taken to a considerably warmer environment. In this case,acclimatize the disconnected appliance for ca. 2 hours at room temperature. Avoid static charge of the balance and of the person to be weighed. Avoid contact with water.Major display deviations (incorrect weighing results) may be experienced shouldelectromagnetic fields (e.g. due to mobile phones or radio equipment), staticelectricity accumulations or instable power supply occur. In that case, the locationmust be changed.8.2 UnpackingTake the balance out of their packaging and place it at the intended position. Whenusing the power pack, ensure that the power cable does not produce a risk ofstumbling.