KERN MPS Series Operating Instructions Manual

Also see for MPS 200K100M: Operating instructions

KERN MPS Series Operating Instructions Manual Manual pdf 42 page image

MPS / MTS / MXS / MWS-BAPS-e-1710428.2 TaringThe dead weight of any initial load used for weighing may be tared away by pressingthe key, so that the following weighing shows the real weight of a person to beweighed. E.g. when a rubber mat is put on the scale plate, the scale does notshow 0 value. To start the taring process, press the [TARE] key. Now internal weightsaving is performed and value of 0.0 kg is displayed. Place a person in the middle of the scale plate. Then read the weight on the display.Direction:The scale can store only one tare value.When the scale is unloaded, the saved tare value is displayed with „negative” sign.To delete the saved tare value, unload the scale plate and then press the [TARE]key.8.3 HOLD functionThe scale is provided with the integrated hold function (determination of average val-ue). It enables people to be weighed accurately although they are not still on thescale plate.Note: Determination of average value is not possible when a person moves toomuch. Switch on the scale with the [ON/OFF] key. The diagnostic scale self-check isperformed. The scale is ready for weighing when the „0.00 kg” weight displayis shown. Place a person in the centre of the scale plate. Press the [HOLD] key. When the triangle is flashing on the display, the scaletakes some measuring values and then the calculated average value is dis-played. Press the [HOLD] key again to return the scale to the normal weighing mode. Pressing the [HOLD] key makes it possible to activate the function at anytime.