KERN MPS_M Operating Instructions Manual

KERN MPS_M Operating Instructions Manual Manual pdf 12 page image

MPS / MTS / MXS / MWS-BA-e-1215126 Unpacking, installation and starting6.1 Place of installation, place of useThe scale is designed in such a way that reliable weighing results can be achievedunder normal application conditions.By selecting the correct location for your scale, you will be able to work quickly andprecisely.Therefore, please observe the following when choosing a place of installation:- Place the scale on a firm, level surface;- Avoid extreme heat as well as temperature fluctuation caused by installing thescale next to a radiator or in the direct sunlight;- Protect the scale against direct draughts due to open windows and doors;- Avoid shaking during weighing;- Protect the scale against high humidity, vapours and dust;- Do not expose the device to extreme dampness for longer periods of time. In-admissible bedewing (condensation of air moisture on the device) can occur ifa cold device is taken into a significantly warmer environment. In this case,please keep the device for approx. 2 hours at room temperature after it hasbeen disconnected from mains supply;- Avoid static charge build-up on the scale and people to be weighed;- Avoid contact with water.Major display deviations (incorrect weighing results) are possible if electromagneticfields occur (e.g. coming from mobile phones or radio equipment) as well as due tostatic charging and instable power supply. It is necessary then to change the scalelocation or remove disturbance source.6.2 UnpackingCarefully remove individual scale parts or the whole scale from its packaging andposition the scale in its intended working location. When the mains adapter is used,be careful not to cause the danger of falling over the power cable.