KERN MPS_M Operating Instructions Manual

KERN MPS_M Operating Instructions Manual Manual pdf 32 page image

MPS / MTS / MXS / MWS-BA-e-1215328 Using scale8.1 Weighing Switch on the scale with the [ON/OFF] key. The diagnostic scale self-check isperformed and then the software version is displayed. The scale is ready forweighing when the „0,00 kg” weight display is shown.Direction: The [ 0 ] key makes it possible to zero the scale if necessary andat any time. Place a person in the middle of the scale. Wait until the stability display (ο) isshown and then read the weighing result.Direction:If a person is heavier than the weighing range, the display will show the „Err” symbol(= overload).8.2 TaringThe dead weight of any initial load used for weighing may be tared away by pressingthe key, so that the following weighing shows the real weight of a person to beweighed. E.g. when a rubber mat is put on the scale plate, the scale does notshow 0 value. To start the taring process, press the [TARE] key. Now internal weightsaving is performed and value of 0.0 kg is displayed. Place a person in the middle of the scale plate. Then read the weight on the display.Direction:The scale can store only one tare value.When the scale is unloaded, the saved tare value is displayed with „negative” sign.To delete the saved tare value, unload the scale plate and then press the [TARE]key.