KERN PCD Operating Instructions Manual

KERN PCD Operating Instructions Manual Manual pdf 17 page image

PCD-BA-e-1211 177.5 Pre-Tare functionMODECALUsing this function the weight of a tare vessel is stored. Evenafter turning off/on the weighing balance will continue workingwith the saved tare value. In weighing mode put tare vessel on the weighing plate Press repeatedly the MODE key until „PtArE“ flashingappears. Use SET key to store the current weight on the weighingplate as a PRE-TARE value.Delete PRE-TAREvalueMODECAL Unload the balance and set the TARE button to zero Press repeatedly the MODE key until „PtArE“ flashingappears. Use the SET key to confirm. The PRE-TARE value isdeleted, the zero display appears.7.6 Plus/minus weighingsTAREFor example unit weight control, fabrication control etc. Put the nominal weight on the weighing plate and tareusing the TARE button. Remove the nominal weight Put the test objects subsequently on the weighing plate,the respective deviation from the nominal weight isdisplayed with the respective sign to „+“ and „-“.According to the same procedure also packages with thesame weight can be produced, referring to a nominalweight. Back to weighing mode by pressing the TARE button.