KERN PLS Operating Instructions Manual

Also see for ALJ: Operating manual Operating manual Operating instruction

KERN PLS Operating Instructions Manual Manual pdf 29 page image

8.3 Parameter for the serial interfaceMenu selection:Ö Turn on balance using the ON/OFF-buttonÖ Press the Tare-button; the display shows horizontal linesÖ While this display is on, press the PRINT -buttonÖ Keep F-button pressed until the desired selection is displayedFunction DisplayF-buttonChoicePRINT-buttonDescription of theselection optionsbod 1 300 bpsbod 2 600 bpsbod 3 1200 bpsbod 4 2400 bpsbod 5* 4800 bpsBaud rate bodbod 6 9600 bpsStAb 0* Output for stableWeighing valueStAb(only ALJ120/220 innon-verifiedsetting)StAb 1 Output also forinstable weighing valuecont 0* Consecutive serial output deactivated, outputonly when button is pressedcontcont 1 Consecutive serial outputdAtE 0* Printout of the weighing values withoutplaceholder for date/timeOutputconditionsat theinterfacedAtE dAtE 1 Printout of the weighing values withplaceholder for date/timeRepl 0 Issue takes place after pressing the PRINTkey.Repl(Condition:cont 0) Repl 1 Automatic issue of first stable weighing valueSequence of operations:1. Tare2. Place weight, issue of first stable weighingvalue3. No next issue until weight is removedCondition: Display +/- 50 display stepsfrom zero4. Place next weight* = Factory settingÖ Confirm setting by pressing the PRINT-buttonPLS/PLJ/ALS/ALJ-BA-e-0819 63