KERN PLT Operating Manual

PLT-BA-defsi-0510 113Ö Press key; the display changes into parts countingoperationÖ The balance is now in parts counting mode counting allunits on the weighing plate01 Reference weight – determination of reference weight through weighingÖ Press key; display changes to counting modeParts counting setupM1 01 Unit weight02 Recall sample03 Store sample04 Checkweighting05 Filling0607 RunStatistics5.0000 gOFFOFFOFFÖ Press the key; use arrow keys to select referencequantity (factory-defined are quantities of 10, 20, 50,100,or freely selectable), use the key to confirmÖ Place as many counting parts on the balance as the setreference quantity requires, confirm by pressing thekey. If you are using a weighing container first tare yourbalance pressing the key.Ö Press buttonThe symbol ( ) in the display indicates that automaticreference optimization is switched on. Every time morepieces are added the balance carries out optimizationautomatically. It is not necessary to press another key tostart the optimization process. For each reference opti-mization the average piece weight (reference) is newlycalculated. As the additional pieces increase the basefor the calculation, the reference also becomes more ex-act.Ö Operate the key. The reference quantity is savedunder "01 Unit weight".Ö Press the key; the balance is now in parts countingmode counting all units on the weighing plate.