KERN RPB Service Manual
                   | |
Contents
| 
4.6 F6 – INITIAL ZERO RANGETo enter this parameter, press the key when “F6” is shown.The display will show the current initial zero range.Press the key to change the value and press to accept the value.NOTE: Only 10% is allowed for the RPB scales.4.7 F7 – RE-ZERO RANGETo enter this parameter, press the key when “F7” is shown.The display will show the current re-zero range.Press the key to change the value and press to accept the value.NOTE: Only 2% is allowed for the RPB scales.4.8 F8 – SUCCESSIVE TARETo enter this parameter, press the key when “F8” is shown.The display will show if the successive tare is on or off.Press the key to change the value.Press to accept the displayed value.NOTE: Either option is allowed for the RPB scales.10 RPB-SH-e-0610 |
Related manuals for KERN RPB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine