KERN VHB Operating Instruction

Also see for VHB: Adjustment instructions

Contents

KERN VHB Operating Instruction Manual pdf 12 page image

VHB-BA-e-1814127 Functions of display unit7.1 Prior to weighing: ZERO-POINT CHECKPrior to each weighing process ensure that the system is unloaded and clear ofobstructions. The display unit provides automatic zero adjustment. This means, thatsmall deviations from the zero-point are corrected automatically. If the display unitdoes not correct the zero-point automatically you will have to carry out a manualcorrection with the help of the key.7.2 Gross weighingAfter the load was lifted, the display shows the gross value of the weighed weight.7.3 Net weighing: TARING BY PRESSING A BUTTONThe display unit offers an option that allows tare weights to be reset to zero bypressing a button. In this way net weight changes can be traced. After taring, thedisplay unit will once again start at the smallest display step. Lift the load. Press button The display unit shows zero. The lit up display “NET“, indicates that a tare weight is active. Loading and unloading the net load. The net value for the weighed weight is shown on the display. For unloading this will be a negative value. The system reverts to standard weighing mode when a zero adjustment is carriedout in an unloaded state.7.4 Net weighing: MANUAL TARE INPUTYou may enter the tare weight at any time, that is, regardless whether the scales arein a loaded or unloaded state. To achieve higher accuracy, a tare weight with ahigher resolution may be entered, regardless of the size of the weight and the displaysteps of the indicator. Press button The most recently used tare value appears. The segment on the right is flashing. Press the key for three seconds if the indicated tare value is to be used againorTARETAREPRE-TARETARE