KERN VHB Operating Instruction
Also see for VHB: Adjustment instructions
                | |
Contents | 
VHB-BA-e-1814 158 Service, maintenance, disposal8.1 CleaningPlease do not use aggressive cleaning agents (solvents or similar agents), but acloth dampened with mild soap suds. Ensure that no liquid penetrates into the deviceand wipe with a dry soft cloth.8.2 Service, maintenanceThe appliance may only be opened by trained service technicians who are authorizedby KERN.The same maintenance guidelines apply to the chassis of the mobile weighingsystem as those for simple manual pallet trucks. Experience has taught us that theintegrated weighing system continues to function even if the chassis was damagedby overloading.General rules: As the steering wheels are mounted at the front, it is better to pull rather thanpush the manual pallet truck. If the lifting device is not used, the manual lever should be left in centreposition. This prolongs the life span of the seals. To prevent damages to the electronic system and weighing cells it isnecessary that welding work on the entire weighing system is carried outexclusively by technical specialists. The bearings of the wheels (with the exception of polyurethane) as well as thejoints in the load roller section should be regularly cleaned and greased.8.3 DisposalDisposal of packaging and appliance must be carried out by operator according tovalid national or regional law of the location where the appliance is used.9 Error messagesThe battery symbol flashes: The battery is almost emptyand must be replaced.Low bat Critical error message:The battery is almost empty.Replace it immediately.Otherwise the weighing system will turn off. All data willbe deleted and you will have to readjust the system. |
Related manuals for KERN VHB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine