KI WorkZone Series Assembly Instructions Manual

Also see for WorkZone Series: Disassembly instructions

Contents

KI WorkZone Series Assembly Instructions Manual Manual pdf 3 page image

Assemble units as described herein only. To do otherwisemay result in instability. All screws, nuts and bolts must betightened securely and must be checked periodically afterassembly. Failure to assemble properly, or to secure partsmay result in assembly failure and personal injury.3WorkZone® Single Universal Overhead CabinetAssembly InstructionsFigure 1#10-32 x /12"screw#8-32 x /12"screwcabinet side(right-hand)cabinet side(left-hand)right-handstanchionstanchioninsert (outer)WorkZoneDeskleft-handstanchionstanchioninsert (inner)grommetholegrommetcoversSingle Universal OverheadCabinet InstallationImportant: WorkZone desk must befully assembled prior to installing theoverhead unit.1. Begin by removing grommet coversfrom the back sides at the top of thedesk where the overhead cabinet willinstall (Figure 1).2. Reference Figure 1 below to identifythe left- and right-hand stanchions,as well as the left- and right-handcabinet sides. One side at a time,position the appropriate stanchionas illustrated such that the lowermounting bracket of the stanchioninserts into the grommet hole. Alignthe mounting holes in the bracketwith the holes in the top of the legand secure using two #10-32 x 1/2”screws (Figure 1).3. Orient the right- and left-hand cabinetsides as illustrated, then nest theminto the tops of the stanchions andalign the mounting holes. Securefrom the inside using two #8-32 x 1/2”screws at each stanchion side(Figure 1).