KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

Also see for ORTHOPANTOMOGRAPH OP 3D: Service manual Quick guide User and installation manual User manual Installation manual

Contents

KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual Manual pdf 56 page image

9 InstallationMinimum operating space requirementsDepth Minimum:1385 mm / 54.5 inRecommendedminimum:1630 mm / 64.2 inWidth Minimum:1375 mm / 54 inRecommendedminimum:1610 mm / 63.4 inHeight Minimum:2080 mm / 81.9 inRecommendedminimum:2467 mm / 97.1 inmin. 660 mm / 26 inmin. 715 mm / 28.1 inrec. 950 mm / 37.4 in9.2.3 Fixing hardware and toolsThe following tools and hardware are required to install and set up the device. These arenot included in the delivery, unless otherwise stated.Fixing hardwareNOTICE! Mounting bolts for floor and wall fastening are not included in thedelivery. The fixing hardware used to fix the device to the wall must be of correcttype for the wall.The type and length of hardware to be used depend on the wall material and floormaterial where the device is to be fixed. The fixing hardware must be selected so thatthey withstand at least 1500 N pull-out force.WARNING! Ensure that the mounting bolts, the wall and the floor the device isattached to, can withstand at least 1500 N pull-out force.Installation tools• Electric drill• Spanners size 13 & 17 mm• Allen keys 3, 5 & 6 mm• Flat head screwdriver• Spirit level• Pliers and wire cutter• Scissors/knife• Torque wrench56 ORTHOPANTOMOGRAPH™ OP 3D