Kaba E-PLEX Installation Instructions Manual

Contents

Kaba E-PLEX Installation Instructions Manual Manual pdf 14 page image

14B-8 Check the bevel of the mortise faceplate. If adjustment is required, loosenthe two bevel screws and adjust mortise front plate angle to match thebevel of the door (R).B-9 Re-tighten screws.B-10 Install the mortise with two 1" Phillips screws (Q) provided.B-11 Install mortise faceplate (P) with the two 8-32 x 1⁄4 " screws provided.C. INSTALLING THE STRIKEC-1 Align the paper template on the doorframe to match with the desired handleheight, and along the vertical center line ofthe mortise (CL), which is also the centerline of the door, allowing for any bumperson the door frame.Respect applicable building codes regard-ing handle height.C-2 Select the strike for the desired handing,according to the depiction on the template.Mark the location of the strike cutout andmounting screws.C-3 Drill pilot holes for the strike mountingscrews. Mortise the door frame for thestrike dimensions shown.3 3⁄8 " (L) X 1" (D) X 1" (W)Note: Make certain not to mortiseover screw holes drilled earlier.( C L )StrikeCutout3 3⁄8"