Kaba E-Plex 5X10 Installation Instructions Manual

Contents

Kaba E-Plex 5X10 Installation Instructions Manual Manual pdf 4 page image

4TOOLS REQUIRED• Safety glasses• Electric drill (variable speed)• Awl or center punch• 2 1⁄8" (54 mm) hole saw pilot drill• 3⁄8" (25 mm) hole saw pilot drill• Hammer• Phillips head screwdriver• Small flat blade screwdriverOPERATIONAL NOTE:The E-Plex Exit Trim lock is almost identical to the E-Plex 5000 Cylindricallock with the following exceptions:1. Operation of the Lever When the lock’s handing is properly set, only adownward rotation of lever will actuate latch.2. Key Override Use The key override differs in that rotating the key doesnot actuate the latch. To use the key override the key must be insertedinto the cylinder and rotated counter clockwise till it stops (approximately90 degrees) then while holding the key in this position with one hand usethe other hand to rotate the lever downward to retract the latch. Once thelever has rotated a few degrees the key may be released.For technical assistance please call1-800-849-TECH (8324) or 336-725-1331