Kaba e-plex 2000 Installation Instructions Manual

Also see for E-PLEX 2000: Operation manual Operation manual Installation instructions Quick reference guide

Contents

Kaba e-plex 2000 Installation Instructions Manual Manual pdf 2 page image

3CHECKLISTParts and Tools ListEach E-Plex 2000 lockset includes:• Outside lock housing• Inside lock assembly• Outside lever• Gasket for outside lock housing• Cylindrical latch• Cylinder drive unit• Battery holder with 3 AA batteries• Drilling template• Hardware bag, includes:- Square spindle- Philips screw (6-32 x 5⁄ 16 ")- Strike kit- (3) mounting screws (10-24, 1⁄ 8" hex head)- Allen Key 1⁄ 8"- (2) 1" (25 mm) Phillips mounting screws- (1) extension spring- (4) pairs of Flat Head screws 10-24- (3) spacers• Key Override (Optional)- (1) cylinder with 2 keys for override- (1) cylinder plug- (1) cylinder capWarning: The Master Code of this lock has been factory preset: 1,2,3,4,5,6,7,8.To activate lock functions, the master combination must be changed at the timeof installation.2TABLE OF CONTENTSChecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Diagram of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5A. Door Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6B. Lock Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6C. Door Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7D. Installing Outside Lever on Non-Mechanical Override . . . . . . . . . . . . . . . . .8E. Reversing the Outside Lever for Series Without Mechanical Override . . . . .9F. Installing Key Override and Outside Lever . . . . . . . . . . . . . . . . . . . . . . . . . .9G. Testing the Operations of the Outside Lever . . . . . . . . . . . . . . . . . . . . . . .12H. Testing the Mechanical Key Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13I. Changing Lock Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15J. Installing Lock Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16K. Installing Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17L. Testing the Operation of the Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18M. Installing the Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18N. Installing Rubber Bumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19For technical assistance, call 1-800-849-TECH (8324) or 336-725-1331Please read and follow all directions carefully.These instructions are designed for use by maintenance professionals or lockinstallers who are familiar with common safety practices and competent to per-form the steps described. Kaba Access Control is not responsible for damage ormalfunction due to incorrect installation.Important: Carefully inspect windows, doorframe, door, etc. to ensure that therecommended procedures will not cause damage. Kaba Access Control stan-dard warranty does not cover damages caused by installation.