7.3 Time Trace, Frequency Sweep and Spectrum Monitor7.4 Measurements with RTF Module Connected to iQA/iPAThe Time Trace, Frequency Sweep and Spectrum Monitor modes are unchanged with the RTF module connected to theiQA/iPA. The return loss pre-test is not performed in these modes.8. RTF Analysis8.1 Activating the RTF Analysis WindowWhen the RTF module is connected to the iQA/iPA a new screen becomes available. This screen is referred to as theRTF Analysis window.To navigate to the RTF Analysis window from the iQA/iPA’s main application window, use the softkey menu sequenceMode → RTF, as shown in Figure 15.Figure 15 Softkey menu path to RTF Analysis screen (iQA)ControlIndicatorFigure 16 Softkey menu path to RTF Analysis screen (iPA)Note : As it is possible to control the iPA from multiple points, the local or remote point that is in control has the power tochange modes . See the iPA operating manual for more details.Operating Manual | Passive Intermodulation and Return Loss Fault Ranging Device26
