8.6.1 Enabling Configuration Mode 498.6.2 Modifying the Frequency of the Fixed Tone 508.6.3 Modifying the Frequency Range of the Swept Tone 508.6.4 Modifying the Maximum Range 508.6.5 Changing the PIM Product 518.6.6 Modifying the Velocity Factor 518.6.7 Modifying a Test Tone Power Level 518.6.8 Modifying the Return Loss Pass/Fail Threshold (iQA) 518.6.9 Applying the Factory Reset 528.7 Changing the RTF Sweep Settings (iPA) 528.7.1 Slider Controls (iPA) 548.7.2 Adjust Upper and Lower Frequency Limits (iPA) 548.7.3 Cable Velocity Factor 548.7.4 Max Range 548.7.5 PIM Product Menu 548.7.6 OK Button 548.7.7 Cancel Button 549. Tips for Getting the Best from the RTF System 559.1 RTF System Practices 559.1.1 Cable & Connector Care 559.1.2 Making PIM vs Distance Measurements 559.1.3 Making Return Loss vs Distance Measurements 559.2 Recommended Procedure for PIM Troubleshooting 559.2.1 Static and Dynamic PIM Faults 559.2.2 Elimination of Multiple Static PIM Faults 569.2.3 PIM Testing Flowchart 569.3 Handling and Transport 579.4 Cleaning the RTF Module 579.5 Troubleshooting Guide 579.6 CE Declaration of Conformity 599.7 End of Life Statement 609.8 Contacts 607© 2017 Infinite Electronics, Inc., All Rights Reserved.
