Kalfire G Series Installation Instructions Manual

Also see for G Series: User instructions

Contents

Kalfire G Series Installation Instructions Manual Manual pdf 27 page image

3. Wait for the iMatch interface to reboot.4. Check whether the red LED is on.Fig. 30: iMatch interface6.17 Using the iMatch app through the iMatchinterfaceThe gas fire can be controlled by using the iMatch app, if theiMatch interface is connected to your local Wi-Fi network.First install the iMatch app on your smartphone or tablet.See: Configure the iMatch app on page 26.Accessing home screen1. Click on the iMatch app icon to open it.2. Drag the standby icon to the right to open the home screen.Overview home screen1. Initiating flame: Press the standby. A semi-circle willappear and the fireplace will start at 100% flame intensity.2. Setting the flame intensity: Press and hold down theblack dot. Move your finger over the circle to set the flameintensity. The percentage will increase and decrease withthe movement of your finger.3. Hybrid LED lighting: Press “off” to turn on the LED lighting.The LED lighting turns on and a semi-circle with the textHybrid appears on the screen.The LED lighting intensity is not adjustable.4. Heating mode: Press “hand controlled” once in the middleof the circle. Now select the heating mode Eco or Manual.5. In case you choose Eco mode, the fireplace is notcontrollable from the App. The fireplace varies from mode 1to 8 automatically.6 Shutting down: The gas fire will shut down, by pressing thestandby button again.Careful ! The NSG is not controllable by using iMatch.27