KanexPro 4K HDBaseT MX-HDBASE4X4-4K User Manual

Also see for 4K HDBaseT MX-HDBASE4X4-4K: User manual

KanexPro 4K HDBaseT MX-HDBASE4X4-4K User Manual Manual pdf 15 page image

4K HDBaseT™ 4x4 Matrix SwitcherMX-HDBASE4X4-4K 9www.kanexpro.comNote: If the conversion is successful, indicators of the pressed buttons will blink greenfor three times at normal speed; if the conversion failed, they will blink for three timesquickly.4.1.3 InquiryØ Check statusPress and hold the button “ENTER” for 3 seconds, it will enter into system inquiry menu.Use Left and Right direction button to navigate checking the previous/next items.Function Items Example DescriptionCheck theconnection status ofinputsY means the correspondingport is connected with inputdevice, N means not.Check theconnection status ofoutputsY means the correspondingport is connected with outputdevice, N means not.Correspondencebetween inputs andoutputsShows the correspondencebetween the 4 inputs and 4outputs.Check if the input iswith HDCPY means the input signal iswith HDCP, N means not.Check if the outputis with HDCPY means the output signal iswith HDCP, N means not.Check the outputresolutionUse the UP and DOWNdirection button to check allthe 4 output resolutions.Ø Output checkPress any output button to check its corresponding input.Example: Check which one is the corresponding input for output 2. (Presume Output 2corresponds to Input 1.)Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, andindicators of input 1 and output 2 turn on and last for 3 seconds. Then output 2