KanexPro 4K HDBaseT MX-HDBASE4X4-4K User Manual

Also see for 4K HDBaseT MX-HDBASE4X4-4K: User manual

KanexPro 4K HDBaseT MX-HDBASE4X4-4K User Manual Manual pdf 9 page image

4K HDBaseT™ 4x4 Matrix SwitcherMX-HDBASE4X4-4K 3www.kanexpro.comOUTPUTSbuttons/EDIDManagement buttonsØ Normal mode: Back-lit buttons, ranging from "1" to"4".Output 1~2 support synchronous local HDMI output.Ø EDID Invoking mode: press and hold EDID button for 3seconds or more to enter this mode, in this mode, button 1,2are used to switch to the previous/ next EDID data. FunctionbuttonsALL: Select all inputs/ outputs.EDID management button: Enable input port to manuallycapture and learn the EDID data of output devices.CLEAR: Withdraw an operation like switching outputchannel; learning EDID data before it comes into effect.Meanwhile, the matrix will return to the previous status.ENTER: Confirm operation. Press and hold it for 3 seconds toenter in Inquiry mode.Notes: Pictures shown in this manual are for reference only, different model andspecifications are subject to real product.2.2 Rear PanelNo. Name Description① IR ALL INInput port for IR control signal, connect with IR receiver, anddeliver IR signal to all the HDBaseT ports to control the remotedevices.② HDMIINPUTSHDMI input ports, 4 in total, type A female HDMI connector,connect with HDMI input source devices.③ IR OUT Connect with IR transmitter, to emit the IR signal sent from theRS232IR EYE TCP/IPDC 24VRS232IR EYE TCP/IPHDMI INPUTSIR OUT1 2 3 41 2 3 4OUTPUTSHDMIAUDIOHDBaseT HDMI2 3 4L RAUDIOL RAUDIOL RAUDIOL RTx Rx Tx Rx Tx RxIR IN1IR IN IR IN IR INIR ALL INCOAXHDBaseT HDBaseT HDBaseT DC 24VCOAX COAX COAX Tx RxHDMIAUDIOHDBaseT L RTx RxIR IN1COAXa b cd e f