KanexPro HDMX44-18G User Manual

Also see for HDMX44-18G: Manual

Contents

KanexPro HDMX44-18G User Manual Manual pdf 11 page image

KANEXPRO HDMX44-18G11 | P a g e4. Panel Button Control4.1 I/O Connection SwitchingThe front panel features four input selection buttons and four output selection buttonsfor switching I/O connection.1. To convert one input to an output:Example: Input 1 to Output 3→ Press INPUTS 1 + OUTPUTS 32. To convert an input to several outputs:Example: Convert Input 2 to Output 3 and 4→ Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4NOTE: Indicators of the pressed buttons will blink green three times if the conversionis done, then it will turn off. If the conversion failed, they will turn off immediately.4.2 EDID ConfigurationThe rear panel boasts a 4-pin EDID DIP switcher to manage EDID. The EDID data andits corresponding DIP switcher status are shown in the below list.DIP SwitcherNO. Status EDID0 0000 Pass though (default)1 0001 720P 2D Pass though CH2 0010 720P 3D Pass though CH3 0011 1080P 2D Pass though CH4 0100 1080P 3D Pass though CH5 0101 4K@30HZ Pass though CH6 0110 4K@30HZ 2.0CH7 0111 4K@30HZ 7.1CH8 1000 4K@60HZ 4:2:0 Pass though CH9 1001 4K@60HZ 4:2:0 7.1CH10 1010 4K@60HZ 4:4:4 Pass though CH11 1011 4K@60HZ 4:4:4 7.1CH1111Enable Software EDID managementmode: RS232 control or Web-basedGUI control