KanexPro HDMX44-18G User Manual

Also see for HDMX44-18G: Manual

Contents

KanexPro HDMX44-18G User Manual Manual pdf 14 page image

KANEXPRO HDMX44-18G14 | P a g ereliable RS232 control.Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none6.3 RS232 Communication Commands1) “[“, “]” in the commands are for easy recognition only and not necessary in realoperations. Other symbols including “.”, “,”, “/”, “%”, “;”, “^”. are parts of thecommands.2) Feedbacks listed in the column “Feedback Example” are only for reference,feedbacks may vary according to different operations.3) Dial the EDID switcher to “1111” before sending commands pertaining to softwareEDID management (with grey background).6.3.1 System CommandsCommand Function Feedback Example/*Type; Query the model. XXXXX/^Version; Query the version of firmware VX.X.XDemo.Switch to the “demo” mode, convertinput and output in turn like1B1,1B2, …4B3, 4B4, 1B1… and soon .The switching interval is 2seconds.Demo ModeAV:01->01AV:01->02AV:01->03AV:01->04AV:02->01…Normal ModeUndo. To cancel the current operation. Undo Ok!PWON. Work in normal mode. PWONPWOFF. Enter into standby mode, send the“PWON.” to start. PWOFFSTANDBY.Enter into standby mode, press otherbuttons or send other commands tostart.)STANDBY%9962. Query the power status STANDBY/PWOFF/PWON%9964. Query the IP address. IP:XXX.XXX.X.XXX%0911. Reset to factory default. Factory Default