KanexPro MX-HDBASE4x4-4k User Manual

Also see for 4K HDBaseT MX-HDBASE4X4-4K: User manual

KanexPro MX-HDBASE4x4-4k User Manual Manual pdf 17 page image

KANEXPRO MX-HDBASE4x4-4k12 | P a g eCheck if the outputis with HDCPY means the output signal iswith HDCP, N means not.Check the outputresolutionUse the UP and DOWNdirection button to check allthe 4 output resolutions. Output checkPress any output button to check its corresponding input.Example: Check which one is the corresponding input for output 2. (Presume Output 2corresponds to Input 1.)Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, andindicators of input 1 and output 2 turn on and last for 3 seconds. Then output 2corresponds to input 1.4.1.4 Clear operationWhen you switch output channel, learn EDID data, or set EDID data, press Clearbutton to withdraw the operation before you press “ENTER” to carry it on. When youpress it, the matrix will return to the previous status.4.2 IR ControlBy using IR & HDBaseT transmission technology, the MX-HDBASE4X4-4K has somefunctions as follows:1) Control far-end output device from local.2) Control local input/output device remotely.3) Control the MX-HDBASE4X4-4K locally/remotely.