KanexPro MX-HDBASE4x4-4k User Manual

Also see for 4K HDBaseT MX-HDBASE4X4-4K: User manual

KanexPro MX-HDBASE4x4-4k User Manual Manual pdf 8 page image

KANEXPRO MX-HDBASE4x4-4k3 | P a g e2. Product Description2.1 Front PanelNo. Name Description① Firmware Micro USB port for updating firmware② PowerIndicator Illuminate red when power on.③ IR In-built IR sensor, receive IR signals sent from IR remote.④ LCD Screen Display real-time operation status.⑤INPUTS/Menubuttons Normal mode: Back-lit buttons, ranging from "1" to "4". Inquiry mode (buttons 1~4): Press “ENTER” for more than3 seconds to enter this mode. Dial to selectdifferent menus, to select different options.⑤OUTPUTSbuttons/EDIDManagement buttons Normal mode: Back-lit buttons, ranging from "1" to "4".Output 1~2 support synchronous local HDMI output. EDID Invoking mode: press and hold EDID button for 3seconds or more to enter this mode, in this mode, button1, 2 are used to switch to the previous/ next EDID data.⑤ FunctionbuttonsALL: Select all inputs/ outputs.EDID management button: Enable input port to manuallycapture and learn the EDID data of output devices.CLEAR: Withdraw an operation like switching outputchannel, learning EDID data before it comes into effect.Meanwhile, the matrix will return to the previous status.ENTER: Confirm operation. Press and hold it for 3 secondsto enter in Inquiry mode.Notes: Pictures shown in this manual are for reference only, different model andspecifications are subject to real product.1 2 3 4CLEAREDIDALLINPUTS MENUENTERIRFIRMWARESYSTEM MONITOR