Programme selection17The data from the programme preview can be transferred to the re-cording timer by pressing only one button. If the programme previewis available, then select the desired programme and transfer the datadirectly to the timer by pressing the [] button.Deleting a timer programming:[1-8] Select the timer line which you would like to delete with thenumerical buttons [1]-[8] or with [▼] or [▲],[OK] and delete the programmed data by pressing the OK button.Note: If you have accidentally deleted a line and would like to restore theoriginal information, exit the timer menu by pressing the [E] buttontwice.Note: Time and date are taken from the DVB data which is transmitted bythe broadcaster. Please correct the „time offset“ for for summer andwinter time in the „Installation“ menu.For CET summer time = {+2 h}For CET winter time = {+1 h}Please keep in mind that some „exotic programmes“ do not transmitthe correct time.Control the date and time in the „Timer programming“ menu, whenyou carry out a programming.EPG – Programme information (Basis navigator)In the EPG (Electronic Programme Guide), information about the cur-rent or following programmes is displayed.The amount of this programme-accompanying information is deter-mined by the respective programme provider and varies considerablyfrom programme to programme. Many programmes can be transmit-ted without usable supplementary information (SI data).It is just the same for the programme preview. Some programme pro-viders do not transmit data. Others transmit a programme overviewwith supplementary information covering several days.Call up and exit the EPG using the [ i ] button.a) Current and following programme[ i ] Shows title, start and end of the current programme, andinformation about the programme depending on theprogramme provider.[ i ] After pressing the button again, the title, start and end of thefollowing programme and supplementary information aboutthe programme, depending on the programme provider, aredisplayed.[ i ] Exits the programme information display.[ E ] Immediately exits the programme information display.b) Further programme preview and supplementary information