Operation9OperationLocal controlOpen (and close) the flap on the front panel of the unit by applyingpressure on the dotted area (left).The local operation consists of the buttons, [STANDBY], [▲] and [▼]for switching programmes (ascending/descending), as well as [ - ] and[ + ] for adjusting the volume.To switch between radio and TV operation, press the [STANDBY] but-ton and then within 1 second press the [ - ] button for radio or [ + ] forTV operation.The LED display shows the switch-over operation Radio/TV for asecond.The receiver has an On/Off mains switch with mains separation.The programme numbers are displayed on a 4-digit, green, 7-segmentdisplay!Display of TV programmesDisplay of radio programmesDisplay t = TV mode (and programme number of the satellite re-ceiver)The points appear when the unit is “muted.“Display ‚Vcr‘:The video/audio signal from the video recorder is automatically fed tothe television set during playback – also in standby.Display ‚Vcr-‘: Through-connection in standby.The unit is in standby and can be switched on by pressing the[STANDBY] button.P 9 9 9r 2 5t 1 2 3P 2.3.4.[ r t ]V c r-V c r -VOLUME CHANNEL▼ ▲