Kathrein UFD 346 Operating Instructions Manual

Also see for UFD 346: Operating instructions

Kathrein UFD 346 Operating Instructions Manual Manual pdf 20 page image

Selecting Radio Programs20Selecting Radio ProgramsThe program suppliers transmit new permanent radio programs over the satellites.You may save these programs using the ”Radio” menu.Select the new programs through:• Manual selection of analog radio programs.• Manual or automatic search selection of digital radio programs (ADR).To select radio programs in ”Radio” mode use the same selection methods as in ”TV”mode.Selecting Radio Programs• Use this button to switch from ”TV” over to ”Radio” mode.• First select the program channel where you want to save the new program.• Call up the radio-menu, by pressing these + buttons consecutively.• Use these buttons to select the required menu option.• The numbers may be entered directly by pressing these buttonsor• You may step through the values by using these buttons.• Press this button twice, to save your settings.• Exit the menu by pressing this button.The Analog Radio MenuThe following parameters may be set from within the analog radio menu:Radio program: R 02Program name: DE W1Sat-frequency: 11214 MHzPolarity: Hor. LowOrbital position: 1Hub: 16 MHzOscillator: LO 1Mode: STEREOFrequency: 7.38/7.56 MHzDe-emphasis: DNR/75μμs0-9 VOL A/B STOR STBYThe status line at the bottom of the menu shows the buttons that you must use tochange the settings.Radio programs are only transmitted with the sound sub-carrier. Therefore the set-ting choice is between ”Stereo” or ”Mono-narrow” only. Audio de-emphasis modeautomatically selects ”DNR” and 75 μs.Important You may leave any setting-up mode at any time (without saving) and return to thenormal mode by pressing this button.The "ADR" Radio MenuThe "ADR Radio" menu settings are nearly the same as for the analog menu.The menu options "Program name" and "De-emphasis" are not required. The programnames are transmitted together with the digital radio programs.The additional menu option is "Clear Program".The remaining settings are identical to the analog radio programs.