Kathrein UFD 346 Operating Instructions Manual

Also see for UFD 346: Operating instructions

Kathrein UFD 346 Operating Instructions Manual Manual pdf 21 page image

Basic Setting-up21Basic Setting-upThe ”Basic Setting-up” menu enables you to connect the receiver to the satellitereception system.Important The receiver has already been pre-programmed by the manufacturer as a standardsatellite receiving system.Changes to the basic setting-up are only required if your receiving equipment isnon-standard or you wish to use a non-standard reception system.These menu settings are normally made by the qualified technician during the ba-sic installation of the satellite reception system.To prevent unintentional changes to the basic setting-up, the basic setting menucan only be called up when the receiver is first switched on, (remove the power in-put).Calling-up the Basic Setting-up Menu• Remove the power plug from the socket in the(Innenhohlleiterstecker) (6) bay.• Press and hold down both program selection buttons (4) simultane-ously on the infra-red sensor.• Re-insert the plug back into the socket.• Release both buttons when the LCD-display shows the following:>OSD language: ÑÑ GERMANLNB voltage-supply ON-at Stand by-: OFFProgram selection: FREEOSD: OFFADR scan . . .Oscillator menu . . .DiSEqC menu . . .EEPROM . . .VOL 0-9 A/B STOR STBYThe status line at the bottom of the menu shows the buttons that you must use tochange the settings.The settings in the basic setting-up menu are made in exactly the same way as inthe previous TV and radio menus:• Use these buttons to select the menu option.• Make selection and call-up sub-menus with these buttons (and thenumber buttons for entering the frequencies).• Press this button twice, to save your settings.• Exit with this button.OSD Window LanguageYou may select your language using the On-Screen-Display window.The choice is between German, English or French.Default setting: German