Kathrein UFD 400 Operating Manual

Also see for UFD 400: Operating manual Mode d'emploi

Kathrein UFD 400 Operating Manual Manual pdf 12 page image

Receiver operation12Stereo- / Mono- / Channel changeoverTV broadcasts can be transmitted in the two-tone channel method(e.g. original tone “English" on channel 1, “German" tone on channel 2).• Press the key. Each time you press the key, you switch the sound channel inthe order:Channel 1 → Channel 2 → Stereo.The selected channel is shown on the screen and in the LED display. The setting isnot saved. After a change in programme the original setting takes effect again.SAT/TV changeoverWhere the satellite receiver and TV set are connected via a Scart cable, many TVsets immediately switchover signal input (on the Scart socket) to video receptionwhen the satellite receiver is turned on. The switching voltage of the TV Scartsocket therefore needs to be switched off if you want to view a terrestrially broad-cast TV programme.• Press the key.The switching voltage on pin 8 of the TV Scart socket is turned off, and it is turnedon again by pressing once more.In TV mode, “TV mode“ is displayed on the screen, the programme slot indicator inthe LED display begins with “t...“.In Sat mode, “Sat mode“ is displayed on the screen, the programme slot indicatorin the LED display begins with “P...“.Setting date and time• Press the key to call up the menu for date and time setting, and turning thecontinuous time display on/off.The following screen display appears:In this menu you can set the date and time and also turn on a continuous time dis-play on the screen.The bottom menu line shows keys you can use to make the settings.Making the settings• Select the menu line using the keys.The selected menu entry flashes.• Change the setting for continuous time display (ON/OFF) using thekeys.• For direct numeric entry use the ... keys.Always enter the date in 6-figure form and time in 4-figure form,or