Kathrein UFD 505 Operating Manual

Also see for UFD 505: Mode d'emploi Mode d'emploi

Contents

Kathrein UFD 505 Operating Manual Manual pdf 19 page image

On-screen displays On Screen DisplaySelecting a TV programme by number entryYou can select a different TV programme during a current TV programme by enter-ing the programme location number.Use the number buttons to for the purpose of entering the programme lo-cations.Example You wish to select the TV channel "DSF". This programme is stored under the pro-gramme location number 015. (The order of TV programmes is defined in the pro-gramme memory and therefore only serves as an example here.)To select this programme, press the numbers and one after the other. Thereceiver waits for about 3 seconds for entry of the next number.Follow the same procedure for all other programmes – i.e. also programmes withthree-digit programme location numbers. You do not have to enter leading zeros.Switching over to radio programmeYou can switch over from a TV programme to a radio programme.Press the button on the remote control for this purpose.The receiver switches over to the programme location of the radio programmes lastset. You can return to the TV programme by pressing the same button or . Thecorresponding display relating to the received programme, i.e. as when selectingthe TV programmes, appears on the screen. The LCD display shows a small "r"together with the programme location number.The screen will be blanked out after several seconds.Reception status - radioAfter switching over the receiver, simplypress the buttons to select otherradio channels in their ascending ordescending order in the channel memory.Every time you press the button, an on-screen display shows you the selected channel together with the time, the pro-gramme start and end times as well as the programme title in the information boxprovided this data is transmitted together with the signal.By pressing the button, you can leavethis information box permanently displayedor switch it off by pressing the button onceagain.A further option of selecting a differentprogramme is to press the button. Theradio programme list is now displayed. Inthe left column it will provide informationrelating to the received satellites, thetransponder and its transmission fre-quency, the polarisation, the symbol rate and the scrambling. The right side showsthe programme number, the programme broadcaster and the type of reception sig-nal (free-to-air/ scrambled). By pressing the buttons you jump to the next19