Kathrein UFD 506 User Manual

Also see for UFD 506: Notice d'utilisation

Kathrein UFD 506 User Manual Manual pdf 22 page image

Menu Structure - Channels22Thus overcoming parental control, e.g. by deleting the mark or settingthe locked channels by the transponder search run, is excluded (thelock can also not be overcome via timer).Note: To deactivate parental control only briefly, e.g. in the evening, you canswitch the {Protection} input field back to “OFF” in the “Parental Con-trol” menu.The “?” marks are not changed in this case and act again after re-newed activation of parental control, i.e. if the {Protection} input field isswitched back to ON!Search runSatellite search runThe satellite search run is over all frequencies of the selected satellite.Select the desired settings in the order of the menu:The individual parameters are selected after activation with the [OK]button and then with the [►] or [◄] buttons.We recommend starting the search run from time to time to find newstations. Use the basic settings shown bold in this case.If you want to search for an individual channel selectively, then youcan shorten the search runtime by restricting known parameters, e.g.band (low) and symbol rate (22).Select the desired satellite {ASTRA} > {Hotbird} > {Sat 3} > to{Sat 8},The band {Low/High} > {Low} > {High},(3) the symbol rate {22+27,5} > {22} > {27,5} > {FREE},or a free symbol rate {XXXX}(Possible only if the symbol rate under item (3) was changed to{FREE})and start the search run with the [OK] button.Choose whether the search should be for unencrypted or encryptedchannels or for both simultaneously:Selection: “FREE“ or “CA” or “FREE+CA”Note: Some of the encrypted channels can also be received freely or freelyfrom time to time.