Kathrein UFD 574/S User Manual

Also see for UFD 574: Mode d'emploi

Contents

Installation47Please mind the suppor-tive information you canread in the individualmenu items by pressing!InstallationNetwork ConfigurationOf course, new networks can also be added to the network configura-tion.Refer to menu item 'antenna alignment' in the installation menu forsupport in aligning the antenna.Get to 'network configuration' by pressing  to call up the mainmenu, and by using the keys  and  (plus password – if acti-vated), scroll to the submenu 'installation'. Select 'network configura-tion' by pressing  . Now, you can add or select a new network.Consider that your installation must be set accordingly!In the next step, e. g. scroll with the keys  to a desired entry,'area 2' or any other.After pressing  or  the question whether you want to add thenetwork is displayed on the screen.Confirm by pressing .The following is displayed:You can now use the keys ,  and  or  to make the entriesin the respective positions according to your receiving installation.Press  three times to exit the menu while the new station data arebeing stored.Under point 'operation', you have to enter whether your active antennais to be fed by the receiver.Under point 'stand-by', you have to enter whether the supply voltage isto be disengaged when the receiver is switched to stand-by.