Kathrein UFS 640si Operating Manual

Contents

21FIRST INSTALLATION: Single-cable system (automatic)The receiver searches for the transmission channelson your single-cable system and shows in the nextdisplay the available transmission channels.Use the buttons to select the transmissionchannel you want and confirm the selection with the button.The receiver now reads the existing system data foryour single-cable system and configures itself.The receiver has been successfully registeredon your single-cable system. Confirm the displaywith the button. Now press the $ (green)button. The receiver will automatically display themenu for the channel search. Continue with the item(“Perform channel search”).If no connection to the single-cable system could be established, you will receive the message“Registration was abortive!”. Check your settings and if necessary call for expert help.If one or more receivers are already present on the system and an additional receiveris to be connected, when assigning the transmission frequency for the new receivermake sure that no transmission frequencies are duplicated. No frequency can be usedby more than one receiver.No frequency can be used by morethan one receiver.The receivers would interfere witheach other.