Kathrein UFS 700si Operating Manual

Contents

10CONNECTION AND SET-UPConnect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “ConnectionExample”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/PVR.For system reasons, the same video signals are to be found at the TV Scart socket as at the video cinchoutput.If you want to play the sound on your hi-fi system, connect the audio cinch sockets to the input sockets onthe hi-fi system, using an appropriate cable (see “Connection Example”).The electrical digital output is intended for the connection of a Dolby Digital system (see “ConnectionExample”).Remove the cover on the rear of the remote control.Insert the two supplied batteries into the remote control. Ensure correct polarity of the batteries;the + and - markings are indicated inside the battery compartment.Slide the cover back into the housing until it locks in place.TV AND VIDEO RECORDER CONNECTIONAUDIO CONNECTIONELECTRICAL DIGITAL OUTPUTINSERTING BATTERIES INTO THE REMOTE CONTROLIf you are recording using an external video recorder, remember not to operate thereceiver during recording, otherwise all the on-screen displays will appear on yourrecording.