Kathrein UFS 700si Operating Manual

Contents

27FIRST INSTALLATION: Single-cable system (Manual)Selection “EXU 908”Transmission channelUse the buttons to select a free available transmission channel. A maximum of eight transmissionchannels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).Secure channel with PINThe EXU 908 single-cable matrix allows the transmission frequency to be protected by inputting a PIN.No other receiver can then use that transmission frequency unless the PIN is input.Use the buttons to select the setting “Yes”. A line with the text “Password PIN” is then displayed.Press the buttons to select this line. You can now use the numeric pad to input a PIN (0-255).Test connectionWhen you have set a free transmission channel, press the buttons to switch to the “Test connection”selection field and press the button. The receiver now tests whether a connection to the single-cablesystem can be established or not. As soon as the receiver has established a connection to the single-cablesystem, you will see the following display:Press the button to acknowledge this display.Then press the button. You will be asked whetheryou wish to save the changes. Use the buttonsto select “Yes, save changes” and confirm by pressingthe button. Now press the ! (green) button.The receiver will automatically display the selection menu for the channel search. Continue by selectingthe item (Execute Channel search).If no connection to the single-cable system could be established, you will receive the message“Registration was abortive!”.Check your settings and if necessary call for expert help.When the “EXU 908” single-cablematrix is being used, it is essentialthat the LNB is set to “Universal”!