74CONNECTING UP THE VIDEO/PVRFor details of how to connect your external recorder to the receiver refer to the connection diagramprovided at the end of this manual and the instructions for the external recorder.In order to make a PVR recording (Record), the satellite receiver must be switched on or the timers mustbe pre-programmed (see “EPG” “Recording (timer)” section).For VCR/PVR playback you must have previously set the UFS 705 Scart socket to “VCR mode” (Scartchangeover), using the button, so that the signal path is set up from the VCR or PVR/AUX Scart socketto the TV Scart socket.In this setting, the picture from the external recorder is switched through to the TV set during playback.Pressing the button again a second time restores priority to the UFS 705 “Scart → Sat” signal.In the setting “Scart → TV” (TV mode) the internal tuner of the TV set has priority and you cannot thensee the signal from the receiver on the screen unless you switch the TV set to the AV channel.The settings “VCR mode” and “TV mode” are shown in the display on the receiver.RECORDINGPLAYBACK
