61( Software) update by satelliteMainmenu - Service menuAfter calling up the menu, you will seethe following on-screen display:The loading process maytake up to 60 minutesYou now see the following on-screendisplay (the actual on-screen displaysmay differ from these examples):Use the buttons to select theparameters to be updated during theupdate procedure.Show infotext (information about the software version)Press the button to display the info text for the available downloads. This indicates the mainfeatures of the new operating software, on the basis of which you can decide whether you want to installthe new software on your receiver.Update softwareSelect “Yes” here if you want to install new software; select “No” if you are satisfied with your oldsoftware version and the changes in the new software are not relevant to you.Update channel listSelect “Yes” here if you want to install the new channel list, or “No” if you want to retain your old channellist. Prior to doing this, you can also save your old channel list via “Software Update by USB”, “SaveChannel List to USB” however, so that if you do not like the new channel list you can revert back to theold one.If a new channel list is loaded, this will be automatically regenerated after each factory reset (FactoryReset) (see “Service Menu”, “Factory Reset”, “Reset Channel List”).All available s modules/componentsfor your receiver will be loaded andthen displayed.Software updates from the satelliteare available for limited periods.If a software update is no longeravailable from the satellite, it can stillbe downloaded from the Internet. Seealso “Software Update by USB” inthis section.New software is available: x.xxChannel list is available: xx.xx.xxxxShow infotextUpdate software: YesUpdate channel list: YesStart update
