Page584Recording a Song¡ CopyThe Copy function allows you to copy a section or all of the data on a track to another location.The destination may be on the same track, or it can be on another track. The destination of the copied data must either be:1) A location that already has data in it.2) The first blank bar after the end of a track (Bar 1 if the destination track is empty).For example, if a track only has 10 bars in it, you cannot copy data onto bar 20. You can, however, copy data to bars 1through 11. Copied data replaces any current data that may be at the destination.TO TRACK : Selects the destination track. Usethe Dial to select the track number 1-16,Tempo, or Chord.BAR : Selects the bar in the destination trackwhere the copied data will be placed.FROM TRACK : Selects the track to be copied.Use the Dial to select the track numbers1-16, Tempo, or Chord.START BAR : Selects the bar where the datathat you are copying starts. Use the Dial tochange the bar number.END BAR : Selects the bar where the datathat you are copying ends. Use the Dial tochange the bar number.BACK : Returns you to the Advanced Recorder menu.UNDO : Undoes the copying. This option is not always available.EXEC : Proceed with copying.¡ DeleteDelete completely erases and removes the bars that you specify.TRACK : Selects the track to be deleted. Use theDial to choose 1-16, Tempo, Chord or All.START BAR : Selects the first bar that has thedata you want to delete. Use the Dial tochange bars.END BAR : Selects the last bar that containsthe data that you want to delete. Use theDial to change bars.BACK : Returns you to the Advanced Recorder menu.UNDO : Undoes the copying. This option is not always available.EXEC : Proceed with copying.
