Kemppi 3200 Operating Manual

Also see for 3200: Technical & service manual Operating manual Operating manual Operation instructions Service manual

Contents

Kemppi 3200 Operating Manual Manual pdf 5 page image

EN1. preFaCe1.1 generalCongratulations on choosing the Kempoweld power source. Used correctly, Kemppi productscan significantly increase the productivity of your welding, and provide years of economicalservice.This operating manual contains important information on the use, maintenance and safety ofyour Kemppi product. The technical specifications of the equipment can be found at the endof the manual.Please read the manual carefully before using the equipment for the first time. For yourown safety and that of your working environment, pay particular attention to the safetyinstructions in the manual.For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppidealer, or visit the Kemppi web site at www.kemppi.com.The specifications presented in this manual are subject to change without prior notice.important notesItems in the manual that require particular attention in order to minimise damage andpersonal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and followtheir instructions.disclaimerWhile every effort has been made to ensure that the information contained in this guideis accurate and complete, no liability can be accepted for any errors or omissions. Kemppireserves the right to change the specification of the product described at any time withoutprior notice. Do not copy, record, reproduce or transmit the contents of this guide withoutprior permission from Kemppi.1.2 prOduCt intrOduCtiOnThe power sources Kempoweld 3200 and 3200W with wire feeder unit WIRE 400 makestogether 320 A MIG welding equipment, which is suitable for heavy industrial use. To theproduct range belong in addition also the power sources Kempoweld 4200, 4200W and5500W. Kempoweld 3200W has inbuilt water cooling unit.power source: Supply voltage of the power source is 3~ 230 V / 400 V. Voltage of powersource is adjusted with turn type switches; together 40 steps. The Volt/Ampere metering unitMSD-1 (accessory) which is included in the power source displays voltage or welding current.Wire feeder unit: The wire feeder unit WIRE 400 is a 4-roll driven unit, which is suitable for air-or liquid-cooled guns. The unit may be turnable above the power source or it may be locked atits place. You can use the WIRE 400 wire feeder unit equipped also with interconnection cableand push-pull gun. KMW timer controls continuous, spot and cycle-arc welding. Accessoryunit KMW sync is needed for connection and use of push-pull guns.3Kempoweld 3200, 3200W / © Kemppi Oy / 1117