Kemppi FastMig Pulse 350 Operating Manual

Also see for FastMig Pulse 350: Quick guide

Contents

15© Kemppi Oy / 1515EN4.3.2 Welding functionsOTHER PROCESSES2T/4T 2T, 4T, MATCHLOGor USERFactory setting is USER =>USER can freely choose theswitching logicSet switching logicHotStart ON, OFF or USER Factory setting is USER =>USER can freely choose is theHotStart ON or OFFHotStartLevel -50 ... +100 % 1 % steps. Factory setting 40%Hot 2T Time 0.0 – 9.9 s 0.1 s steps. Factory setting 1.2 sCraterFill ON, OFF, USER Factory setting is USER =>USER can freely choose is theCraterFill ON or OFFCraterStart 10 – 250% Factory setting is 100% Set the level of the curve where the craterfilling will startCraterFillEnd 10 – 250 %, nothigher than start1 % steps. Factory setting 30% Set the level of the curve where the craterfilling will end.CraterTime 0.0 – 10.0 s 0.1 s steps. Factory setting 1.0 s CrateFill Slope TimeCrater 4T Timer On or OFF Factory setting is OFF ON: if 4T is selected crater filling will lastat least time that has been ad-justed byCraterTime or as long as trigger is pressed.OFF: if 4T is selected crater filling will last aslong as trigger is pressed.Creep Start 10 – 99% 1% steps. OFF, CURVE(OFF = 100%)Factory setting is CURVE (Creep Start valuecomes from Welding program).StartPower -9 ... +9 Factory setting is 0 Adjusts arc ignitionWISEROOT / WISETHIN2T/4T 2T, 4T, MATCHLOGor USERFactory setting is USER =>USER can freely choose theswitching logicSet switching logicHotStart ON, OFF or USER Factory setting is USER =>USER can freely choose is theHotStart ON or OFFHotStartLevel -50 ... +100 % 1 % steps. Factory setting 40%Hot 2T Time 0.0 – 9.9 s 0.1 s steps. Factory setting1.2 sCraterFill ON, OFF, USER Factory setting is USER =>USER can freely choose is theCraterFill ON or OFFCraterStart 10 – 250% Factory setting is 100% Set the level of the curve where the craterfilling will start.CraterFillEnd 10 – 250%, nothigher than start1 % steps. Factory setting 30%CraterTime 0.0 – 10.0 s 0.1 s steps. Factory setting1. 0 s