Kemppi MinarcTig Evo 200 Operating Manual

Also see for MinarcTig Evo 200: Service manual Quick guide Quick start guide

Contents

EN2. BEFORE YOU START USING THE UNITNOTE! Please read the separate safety instruction booklet provided before you commence welding.Pay particular attention to the risks associated with fire and explosion.2.1 UnpackingAlways before using the equipment, make sure it was not damaged during transportation.Also check that you have received what you ordered and that there are instructions for it.The packaging material of the products is suitable for recycling.TransportationThe machine should be transported in an upright position.NOTE! Always move the welding machine by lifting it from the handle. Never pull it from thewelding torch or other cables.EnvironmentThe machine is suitable for both indoor and outdoor use, but it should be protected from rainand sunshine. Store the machine in a dry and clean environment and protect it from sand anddust during use and storage. The recommended operating temperature range is -20 °C – +40 °C.Place the machine in such a way that it does not come in contact with hot surfaces, sparks andspatters. Make sure the air flow in the machine is unrestricted.2.2 Positioning and location of the machinePlace the machine on a firm, dry and level surface. Where possible, do not allow dust or otherimpurities to enter the machines cooling air flow. Preferably site the machine above floor level;for example on a suitable carriage unit.Notes for positioning the machine• The surface inclination should not exceed 15 degrees.• Ensure the free circulation of the cooling air. There must be at least 20 cm of free space infront of and behind the machine for cooling air to circulate.• Protect the machine against heavy rain and direct sunshine.NOTE! The machine should not be operated in the rain as the protection class of the machine,IP23S, allows for outside preserving and storage only.NOTE! Never use a wet welding machine.NOTE! Never aim metallic grinding spray/sparks towards the equipment.2.3 Distribution networkAll regular electrical devices without special circuits generate harmonic currents intodistribution network. High rates of harmonic current may cause losses and disturbance tosome equipment.MinarcTig Evo 200 and MinarcTig Evo 200MLP complies with IEC 61000-3-12.2.4 Serial numberThe serial number of the unit is marked on the rating plate. The serial number makes itpossible to trace product manufacturing series. You might need the serial number whenplacing spare parts orders or when planning maintenance.MinarcTig Evo 200, 200MLP4